Here is a list of features that are disabled by default since they are breaking changes or are considered experimental. Their behaviour can change in future releases which will be communicated via the .
You can enable them using the --enable-feature
flag with a comma separated list of features.
They may be enabled by default in future versions.
--enable-feature=expand-external-labels
Replace ${var}
or $var
in the external_labels
values according to the values of the current environment variables. References
to undefined variables are replaced by the empty string.
The $
character can be escaped by using $$
.
--enable-feature=remote-write-receiver
The remote write receiver allows Prometheus to accept remote write requests from other Prometheus servers. More details can be found here.
Activating the remote write receiver via a feature flag is deprecated. Use --web.enable-remote-write-receiver
instead. This feature flag will be ignored in future versions of Prometheus.
--enable-feature=exemplar-storage
introduces the ability for scrape targets to add exemplars to certain metrics. Exemplars are references to data outside of the MetricSet. A common use case are IDs of program traces.
Exemplar storage is implemented as a fixed size circular buffer that stores exemplars in memory for all series. Enabling this feature will enable the storage of exemplars scraped by Prometheus. The config file block storage/exemplars can be used to control the size of circular buffer by # of exemplars. An exemplar with just a trace_id=<jaeger-trace-id>
uses roughly 100 bytes of memory via the in-memory exemplar storage. If the exemplar storage is enabled, we will also append the exemplars to WAL for local persistence (for WAL duration).
--enable-feature=memory-snapshot-on-shutdown
This takes the snapshot of the chunks that are in memory along with the series information when shutting down and stores it on disk. This will reduce the startup time since the memory state can be restored with this snapshot and m-mapped chunks without the need of WAL replay.
--enable-feature=extra-scrape-metrics
When enabled, for each instance scrape, Prometheus stores a sample in the following additional time series:
scrape_timeout_seconds
. The configured scrape_timeout
for a target. This allows you to measure each target to find out how close they are to timing out with scrape_duration_seconds / scrape_timeout_seconds
.scrape_sample_limit
. The configured sample_limit
for a target. This allows you to measure each target
to find out how close they are to reaching the limit with scrape_samples_post_metric_relabeling / scrape_sample_limit
. Note that scrape_sample_limit
can be zero if there is no limit configured, which means that the query above can return +Inf
for targets with no limit (as we divide by zero). If you want to query only for targets that do have a sample limit use this query: scrape_samples_post_metric_relabeling / (scrape_sample_limit > 0)
.scrape_body_size_bytes
. The uncompressed size of the most recent scrape response, if successful. Scrapes failing because body_size_limit
is exceeded report -1
, other scrape failures report 0
.--enable-feature=new-service-discovery-manager
When enabled, Prometheus uses a new service discovery manager that does not restart unchanged discoveries upon reloading. This makes reloads faster and reduces pressure on service discoveries' sources.
Users are encouraged to test the new service discovery manager and report any issues upstream.
In future releases, this new service discovery manager will become the default and this feature flag will be ignored.
--enable-feature=agent
When enabled, Prometheus runs in agent mode. The agent mode is limited to discovery, scrape and remote write.
This is useful when you do not need to query the Prometheus data locally, but only from a central remote endpoint.
--enable-feature=promql-per-step-stats
When enabled, passing stats=all
in a query request returns per-step
statistics. Currently this is limited to totalQueryableSamples.
When disabled in either the engine or the query, per-step statistics are not computed at all.
--enable-feature=auto-gomaxprocs
When enabled, GOMAXPROCS variable is automatically set to match Linux container CPU quota.
--enable-feature=auto-gomemlimit
When enabled, the GOMEMLIMIT variable is automatically set to match the Linux container memory limit. If there is no container limit, or the process is running outside of containers, the system memory total is used.
There is also an additional tuning flag, --auto-gomemlimit.ratio
, which allows controlling how much of the memory is used for Prometheus. The remainder is reserved for memory outside the process. For example, kernel page cache. Page cache is important for Prometheus TSDB query performance. The default is 0.9
, which means 90% of the memory limit will be used for Prometheus.
--enable-feature=no-default-scrape-port
When enabled, the default ports for HTTP (:80
) or HTTPS (:443
) will not be added to
the address used to scrape a target (the value of the __address_
label), contrary to the default behavior.
In addition, if a default HTTP or HTTPS port has already been added either in a static configuration or
by a service discovery mechanism and the respective scheme is specified (http
or https
), that port will be removed.
--enable-feature=native-histograms
When enabled, Prometheus will ingest native histograms (formerly also known as sparse histograms or high-res histograms). Native histograms are still highly experimental. Expect breaking changes to happen (including those rendering the TSDB unreadable).
Native histograms are currently only supported in the traditional Prometheus
protobuf exposition format. This feature flag therefore also enables a new (and
also experimental) protobuf parser, through which all metrics are ingested
(i.e. not only native histograms). Prometheus will try to negotiate the
protobuf format first. The instrumented target needs to support the protobuf
format, too, and it needs to expose native histograms. The protobuf format
allows to expose classic and native histograms side by side. With this feature
flag disabled, Prometheus will continue to parse the classic histogram (albeit
via the text format). With this flag enabled, Prometheus will still ingest
those classic histograms that do not come with a corresponding native
histogram. However, if a native histogram is present, Prometheus will ignore
the corresponding classic histogram, with the notable exception of exemplars,
which are always ingested. To keep the classic histograms as well, enable
scrape_classic_histograms
in the scrape job.
Note about the format of le
and quantile
label values:
In certain situations, the protobuf parsing changes the number formatting of
the le
labels of classic histograms and the quantile
labels of
summaries. Typically, this happens if the scraped target is instrumented with
provided that
promhttp.HandlerOpts.EnableOpenMetrics
is set to false
. In such a case, integer label values are represented in the
text format as such, e.g. quantile="1"
or le="2"
. However, the protobuf parsing
changes the representation to float-like (following the OpenMetrics
specification), so the examples above become quantile="1.0"
and le="2.0"
after
ingestion into Prometheus, which changes the identity of the metric compared to
what was ingested before via the text format.
The effect of this change is that alerts, recording rules and dashboards that
directly reference label values as whole numbers such as le="1"
will stop
working.
Aggregation by the le
and quantile
labels for vectors that contain the old and
new formatting will lead to unexpected results, and range vectors that span the
transition between the different formatting will contain additional series.
The most common use case for both is the quantile calculation via
histogram_quantile
, e.g.
histogram_quantile(0.95, sum by (le) (rate(histogram_bucket[10m])))
.
The histogram_quantile
function already tries to mitigate the effects to some
extent, but there will be inaccuracies, in particular for shorter ranges that
cover only a few samples.
Ways to deal with this change either globally or on a per metric basis:
le
, quantile
label values, but otherwise do
nothing and accept that some queries that span the transition time will produce
inaccurate or unexpected results.
This is the recommended solution, to get consistently normalized label values.
Also Prometheus 3.0 is expected to enforce normalization of these label values.metric_relabel_config
to retain the old labels when scraping targets.
This should only be applied to metrics that currently produce such labels. metric_relabel_configs:
- source_labels:
- quantile
target_label: quantile
regex: (\d+)\.0+
- source_labels:
- le
- __name__
target_label: le
regex: (\d+)\.0+;.*_bucket
--enable-feature=otlp-write-receiver
The OTLP receiver allows Prometheus to accept OpenTelemetry metrics writes.
Prometheus is best used as a Pull based system, and staleness, up
metric, and other Pull enabled features
won't work when you push OTLP metrics.
--enable-feature=promql-experimental-functions
Enables PromQL functions that are considered experimental and whose name or semantics could change.
--enable-feature=created-timestamp-zero-ingestion
Enables ingestion of created timestamp. Created timestamps are injected as 0 valued samples when appropriate. See PromCon talk for details.
Currently Prometheus supports created timestamps only on the traditional Prometheus Protobuf protocol (WIP for other protocols). As a result, when enabling this feature, the Prometheus protobuf scrape protocol will be prioritized (See scrape_config.scrape_protocols
settings for more details).
Besides enabling this feature in Prometheus, created timestamps need to be exposed by the application being scraped.
--enable-feature=concurrent-rule-eval
By default, rule groups execute concurrently, but the rules within a group execute sequentially; this is because rules can use the
output of a preceding rule as its input. However, if there is no detectable relationship between rules then there is no
reason to run them sequentially.
When the concurrent-rule-eval
feature flag is enabled, rules without any dependency on other rules within a rule group will be evaluated concurrently.
This has the potential to improve rule group evaluation latency and resource utilization at the expense of adding more concurrent query load.
The number of concurrent rule evaluations can be configured with --rules.max-concurrent-rule-evals
, which is set to 4
by default.
--enable-feature=metadata-wal-records
When enabled, Prometheus will store metadata in-memory and keep track of metadata changes as WAL records on a per-series basis.
This must be used if you are also using remote write 2.0 as it will only gather metadata from the WAL.
This documentation is . Please help improve it by filing issues or pull requests.